Refurbished EG 1034

Click to Enlarge

Manufacturer:ELECTROGLAS

Refurbished by:Allwin21 Corp

The ELECTROGLAS Model 1034X Automatic Wafer Probe is a precision instrument for testing and classifying semiconductor devices in wafer form. The Model I034X is a self-nontained system comprising two modules, a probe module and a power module.  Both modules are designed for compact bench-top mounting; however, an interconnecting cable permits remote mounting of the power module when desired.

The ELECTROGLAS 1034X is designed for operational simplicity and fast wafer throughput. The unique ELECTROGLAS solid-state high-speed X-Y Positioning System permits simplified wafer loading and unloading outside the probe ring area with high-speed travel to and from the load position. Simplified manual and semi-automatic controls assure rapid wafer alignment by automatic gross positioning, simplified theta alignment, and precise device alignment by use of a multi-function joystick that provides 20 different manual commands in a single control. The high-speed automatic probing cycle provides automatic indexing, probing and inking of all devices on the wafer under preprogrammed indexing control, and automatic return to the load position when probing is complete. The system accommodates up to 4-inch (102-mm) wafers and provides indexing in either English or Metric system units.

Original Electroglas EG1034X Wafer Prober key features：

• Direct computer control (if the SUPER D control module is used)
• Wafer Size Range: 3″-- 6″
• X-Y stage travel: 150mm×150mm
• Power supply: 110V/220V，50/60Hz
• Compressed air pressure: 80 psi
• Power consumption: <100W
• Accuracy: ±5μm

 ______________________________________________________________

Allwin21 Corp. can also provide  Allwin21 Corp proprietary AW Software and Allwin21 new technologies to upgrade the refurbished EG 1034 which provides the following significant advantages.

1. Pentium PC controller with DOS-WINDOW graphics GUI, Touchscreen optional
2. Wafer Map data storage
3. Programmable speed and acceleration control for X, Y and Z motor
4. Improved precision for X and Y Step from 5.0um to 2.0 um better than 2.5um for EG2001
5. Programmable Z –height movement
6. Remote/manual light on-off control with long life high-bright LED illumination
7. Movement Temperature compensation option as EG2001
8. Compact design reduces total tool footprint by eliminating the old separate logical controller, motor driver and long cables
9. Universal AC input 110V~240V